Pim Holdtime Join-Prune; Pim Require-Genid - 3Com S7906E Command Reference Manual

Use the undo pim holdtime assert command to restore the system default.
By default, the assert timeout time is 180 seconds.
Related commands: holdtime join-prune, pim holdtime join-prune, holdtime assert.
Examples
# Set the assert timeout time to 100 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim holdtime assert 100

pim holdtime join-prune

Syntax
pim holdtime join-prune interval
undo pim holdtime join-prune
View
Interface view
Default Level
2: System level
Parameters
interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use the pim holdtime join-prune command to configure the join/prune timeout time on the interface.
Use the undo pim holdtime join-prune command to restore the system default.
By default, the join/prune timeout time is 210 seconds.
Related commands: holdtime assert, pim holdtime assert, holdtime join-prune.
Examples
# Set the join/prune timeout time to 280 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim holdtime join-prune 280

pim require-genid

Syntax
pim require-genid
undo pim require-genid
View
Interface view
1-39