Display Ospf Brief - 3Com S7906E Command Reference Manual

display ospf brief

Syntax
display ospf [ process-id ] brief
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the display ospf brief command to display OSPF brief information. If no OSPF process is
specified, brief information about all OSPF processes is displayed.
Examples
# Display OSPF brief information.
<Sysname> display ospf brief
OSPF Process 1 with Router ID 192.168.1.2
RouterID: 192.168.1.2
Route Tag: 0
Multi-VPN-Instance is not enabled
Applications Supported: MPLS Traffic-Engineering
SPF-schedule-interval: 5 0 5000
LSA generation interval: 5 0 5000
LSA arrival interval: 1000
Transmit pacing: Interval: 20 Count: 3
Default ASE parameters: Metric: 1 Tag: 1 Type: 2
Route Preference: 10
ASE Route Preference: 150
SPF Computation Count: 22
RFC 1583 Compatible
Area Count: 1
ExChange/Loading Neighbors: 0
Area: 0.0.0.1
Authtype: None Area flag: NSSA
SPF Scheduled Count: 5
ExChange/Loading Neighbors: 0
OSPF Protocol Information
Border Router:
Nssa Area Count: 1
(MPLS TE not enabled)
NSSA
1-11