Pim - 3Com S7906E Command Reference Manual

pim

Syntax
pim [ vpn-instance vpn-instance-name ]
undo pim [ vpn-instance vpn-instance-name ]
View
System view
Default Level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
Description
Use the pim command to enter public instance PIM view or VPN instance PIM view.
Use the undo pim command to remove all configurations performed in public instance PIM view or
VPN instance PIM view.
Note that:
If vpn-instance is not specified, this configuration will take effect only on the public instance.
IP multicast routing must be enabled in the corresponding instance before this command can take
effect.
Related commands: multicast routing-enable in Multicast Routing and Forwarding Commands of the
IP Multicast Volume.
Examples
# Enable IP multicast routing in the public instance and enter public instance PIM view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] pim
[Sysname-pim]
# Enable IP multicast routing in VPN instance mvpn and enter PIM view of VPN instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] route-distinguisher 100:1
[Sysname-vpn-instance-mvpn] multicast routing-enable
[Sysname-vpn-instance-mvpn] quit
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn]
1-33