3Com S7906E Command Reference Manual page 1253

Address family IPv4 Unicast: advertised and received
Received: Total 5 messages, Update messages 1
Sent: Total 4 messages, Update messages 0
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 1-7 display bgp multicast peer command output description
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
BGP current event
BGP last state
Port
Configured: Active Hold Time
Keepalive Time
Received: Active Hold Time
Negotiated: Active Hold Time
Peer optional capabilities
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between advertisement runs
Optional capabilities
Peer Preferred Value
BFD
Description
IP address of the peer
Local router ID
Peer type
BGP version
Router ID of the peer
Current state of the peer
Current event of the peer
Previous state of the peer
TCP port numbers
Local holdtime interval
Local keepalive interval
Remote holdtime interval
Negotiated holdtime interval
Optional capabilities supported by the peer, including
multiprotocol BGP extensions and route refresh
Routes are advertised and received in IPv4 unicasts.
Total numbers of received packets and updates
Total numbers of sent packets and updates
Maximum allowed prefix number
Threshold value
Minimum route advertisement interval
Optional capabilities enabled by the peer
Preferred value specified for the routes from the peer
Status of BGP (enabled/disabled)
1-17