Maximum Load-Balancing (Ripng View) - 3Com S7906E Command Reference Manual

Description
Use the import-route command to redistribute routes from another routing protocol.
Use the undo import-route command to disable redistributing routes from another routing protocol.
By default, RIPng does not redistribute routes from other routing protocols.
You can configure a routing policy to redistribute only needed routes.
You can specify a cost for redistributed routes using the cost keyword.
Related commands: default cost.
Examples
# Redistribute IPv6-IS-IS routes (process 7) and specify the metric as 7.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] import-route isisv6 7 cost 7

maximum load-balancing (RIPng view)

Syntax
maximum load-balancing number
undo maximum load-balancing
View
RIPng view
Default Level
2: System level
Parameters
number: Maximum number of equal-cost load-balanced routes. Its value is in the range 1 to 4.
Description
Use the maximum load-balancing command to specify the maximum number of equal-cost routes for
load balancing.
Use the undo maximum load-balancing command to restore the default.
By default, the maximum number of equal cost routes for load balancing is 4.
Configure the maximum number according to the memory size.
Examples
# Set the maximum number of load balanced routes with equal cost to 2.
<Sysname> system-view
1-9