3Com S7906E Command Reference Manual page 690

Hide thumbs Also See for S7906E:

Table of Contents

Use the display ipv6 routing-table verbose command to display detailed information about all active

and inactive routes, including the statistics of the entire routing table and information for each route.

# Display detailed information about all active and inactive routes.

<Sysname> display ipv6 routing-table verbose

Routing Table :

Destinations : 1

RelayNextHop : ::

Table 1-8 display ipv6 routing-table verbose command output description

PrefixLength

RelayNextHop

: InLoopBack0

: Active NoAdv

Destination IPv6 address

Prefix length of the address

Route priority

Recursive next hop

Tag of the route

Neighbor address

Outbound interface

Routing protocol

State of the route, Active, Inactive, Adv (advertised), or NoAdv (not advertised)

Cost of the route

Time that has elapsed since the route was generated

PrefixLength : 128

Chapters

Table of Contents

S7910e S7906e-v S7903e S7903e-s S7902e