Display Ipv6 Routing-Table Ipv6-Address1 Ipv6-Address2 - 3Com S7906E Command Reference Manual

Summary Count: 3
Destination: 10::/64
NextHop : ::
Interface : NULL0
Destination: 10::/68
NextHop : ::
Interface : NULL0
Destination: 10::/120
NextHop : ::
Interface : NULL0
# Display brief information about the matched route with the longest prefix length.
<Sysname> display ipv6 routing-table 10:: 127 longer-match
Routing Tables:
Summary Count : 1
Destination: 10::/120
NextHop : ::
Interface : NULL0
Refer to Table 1-6

display ipv6 routing-table ipv6-address1 ipv6-address2

Syntax
display ipv6 routing-table ipv6-address1 prefix-length1 ipv6-address2 prefix-length2 [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-address1/ipv6-address2: An IPv6 address range from IPv6 address1 to IPv6 address2.
prefix-length1/prefix-length2: Prefix length, in the range 0 to 128.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
Description
Use the display ipv6 routing-table ipv6-address1 ipv6-address2 command to display routes with
destinations falling into the specified IPv6 address range.
Examples
# Display routes with destinations falling into the IPv6 address range.
<Sysname> display ipv6 routing-table 100:: 64 300:: 64
for description about the above output.
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
1-17
: Static
: 0
: Static
: 0
: Static
: 0
: Static
: 0