Display Igmp Interface - 3Com S7906E Command Reference Manual

(1.1.1.1, 224.1.1.1):
Attribute:
Host port unit board: Mask(0x8 3)
Host port(s):total 1 port.
GE2/0/2
MAC group(s):
MAC group address:0100-5e01-0101
Host port unit board: Mask(0x8 3)
Host port(s):total 1 port.
GE2/0/2
Table 1-2 display igmp group port-info command output description
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port,
C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Router port(s)
( 00:01:30 )
IP group address
MAC group address
Attribute
Host port(s)

display igmp interface

Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] interface [ interface-type
interface-number ] [ verbose ]
View
Any view
Default Level
1: Monitor level
Host Port
(D)
Field Description
Total number of IP multicast groups
Total number of IP multicast sources
Total number of MAC multicast groups
Port flags: D for a dynamic port, S for a static port, and
C for a port copied from a (*, G) entry to an (S, G)
entry
Sub-VLAN flags: R for a real egress sub-VLAN under
the current entry, and C for a sub-VLAN copied from a
(*, G) entry to an (S, G) entry
Number of router ports
Remaining time of dynamic member port or router
port aging timer. To get this time value of a
non-aggregation port on a board other than the
SRPU, you must specify the number of the slot where
the corresponding board resides by using slot
slot-number. This is not required for an aggregation
port.
Address of the IP multicast group
Address of the MAC multicast group
Attribute of the IP multicast group
Number of member ports
1-4