Display Ipv6 Routing-Table Acl - 3Com S7906E Command Reference Manual

Destinations : 1
Destination : ::1/128
NextHop : ::1
Interface : InLoop0
Table 1-6 display ipv6 routing-table command output description
Field
Destination
NextHop
Preference
Interface
Protocol
Cost

display ipv6 routing-table acl

Syntax
display ipv6 routing-table acl acl6-number [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
acl6-number: Basic IPv6 ACL number, in the range 2000 to 2999.
verbose: Displays both active and inactive verbose routing information permitted by the ACL. Without
this keyword, only brief active routing information is displayed.
Description
Use the display ipv6 routing-table acl command to display routing information permitted by the IPv6
ACL.
If the specified IPv6 ACL is not available, all routing information is displayed.
Examples
# Display brief routing information permitted by ACL 2000.
<Sysname> display ipv6 routing-table acl 2000
Routes Matched by Access list
Summary Count : 2
Destination : ::1/128
NextHop : ::1
Routes : 1
Protocol
Preference
Cost
IPv6 address of the destination network/host
Nexthop address
Route priority
Outbound interface
Routing protocol
Route cost
2000 :
Protocol
Preference : 0
1-15
: Direct
: 0
: 0
Description
: Direct