Display Ip Interface Brief - 3Com S7906E Command Reference Manual

ICMP packet input number:
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Echo request:
Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:
DHCP packet deal mode

display ip interface brief

Syntax
display ip interface brief [ interface-type [ interface-number ] ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type: Interface type.
interface-number: Interface number.
Description
Use the display ip interface brief command to display brief information about a specified or all layer 3
interfaces.
Without the interface type and interface number specified, the information about all layer 3 interfaces is
displayed; with only the interface type specified, the information about all layer 3 interfaces of the
Field
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1-3
Description
Total number of ICMP packets received on an
interface, including the following packets:
Echo reply packet
Unreachable packets
Source quench packets
Routing redirect packets
Echo request packets
Router advertisement packets
Router solicitation packets
Time exceeded packets
IP header bad packets
Timestamp request packets
Timestamp reply packets
Information request packets
Information reply packets
Netmask request packets
Netmask reply packets
Unknown type packets
DHCP packet processing mode. This field
appears on a DHCP-supported device and
can be one of the following values:
global: The DHCP server with the global
address pool is enabled on the interface.
relay: The DHCP relay agent is enabled on
the interface.