3Com S7906E Command Reference Manual page 1342

Parameters
vlan-id: VLAN ID, in the range of 1 to 4094. If you do not specify a VLAN, this command will display the
Layer 2 port information of MLD multicast groups in all VLANs.
slot slot-number: Displays the Layer 2 port information about MLD multicast groups on the specified
card. If you do not specify a slot number, this command will display the Layer 2 port information about
MLD multicast groups on the main processing unit.
verbose: Displays the detailed information about Layer 2 ports of MLD multicast groups.
Description
Use the display mld group port-info command to view Layer 2 port information of MLD multicast
groups.
Examples
# View detailed Layer 2 port information of MLD multicast groups.
<Sysname> display mld group port-info verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
Vlan1
IP group(s):the following ip group(s) match to one mac group.
IP group address: FF03::101
(FE80::1, FF03::101):
Attribute:
Host port(s):total 1 port.
Vlan2
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 1 port.
Vlan2
Table 1-2 display mld group port-info command output description
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port,
C-Copy port
(D) ( 00:01:30 )
Host Port
(D) ( 00:03:23 )
Field
1-3
Description
Total number of IPv6 multicast groups
Total number of IPv6 multicast sources
Total number of MAC multicast groups
Port flag: D stands for dynamic port, S for static
port, and C for port copied from a (*, G) entry to
an (S, G) entry.