Display Bgp Routing-Table Community - 3Com S7906E Command Reference Manual

Total Number of Routes: 1
BGP Local router ID is 20.20.20.1
Status codes: * - valid, > - best, d - damped,
Network
*> 40.40.40.0/24
Refer to Table 1-6

display bgp routing-table community

Syntax
display bgp routing-table community [ aa:nn&<1-13> ] [ no-advertise | no-export |
no-export-subconfed ] * [ whole-match ]
View
Any view
Default Level
1: Monitor level
Parameters
aa:nn: Community number. Both aa and nn are in the range 0 to 65535.
&<1-13>: Argument before it can be entered up to 13 times.
no-advertise: Displays BGP routes that cannot be advertised to any peer.
no-export: Displays BGP routes that cannot be advertised out the AS. If a confederation is configured,
it displays routes that cannot be advertised out the confederation, but can be advertised to other sub
ASs in the confederation.
no-export-subconfed: Displays BGP routes that cannot be advertised out the AS or to other sub ASs
in the configured confederation.
whole-match: Displays the BGP routes exactly matching the specified community attribute.
Description
Use the display bgp routing community command to display BGP routing information with the
specified BGP community attribute.
Examples
# Display BGP routing information with the specified BGP community.
<Sysname> display bgp routing-table community 11:22
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
30.30.30.1
for description on the above fields.
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
MED LocPrf
0
1-22
PrefVal Path/Ogn
0 300i