Display Ipv6 Routing-Table Ipv6-Prefix - 3Com S7906E Command Reference Manual

Routing Table :
Summary Count : 3
Destination: 100::/64
NextHop : ::
Interface : NULL0
Destination: 200::/64
NextHop : ::
Interface : NULL0
Destination: 300::/64
NextHop : ::
Interface : NULL0
Refer to Table 1-6

display ipv6 routing-table ipv6-prefix

Syntax
display ipv6 routing-table ipv6-prefix ipv6-prefix-name [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-prefix-name: Name of the IPv6 prefix list, in the range 1 to 19 characters.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
Description
Use the display ipv6 routing-table ipv6-prefix command to display routes permitted by the IPv6
prefix list.
Examples
# Display brief active routing information permitted by the IPv6 prefix list test2.
<Sysname> display ipv6 routing-table ipv6-prefix test2
Routes Matched by Prefix list
Summary Count : 1
Destination: 100::/64
NextHop : ::
Interface : NULL0
Refer to Table 1-6
for description about the above output.
test2
for description about the above output.
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
Protocol
Preference: 60
Cost
:
Protocol
Preference: 60
Cost
1-18
: Static
: 0
: Static
: 0
: Static
: 0
: Static
: 0