3Com S7906E Command Reference Manual page 882

Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Received: Total 5 messages, Update messages 1
Sent: Total 4 messages, Update messages 0
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 1-5 display bgp peer command output description
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
BGP current event
BGP last state
Port
Configured: Active Hold Time
Keepalive Time
Received: Active Hold Time
Negotiated: Active Hold Time
Peer optional capabilities
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between advertisement
runs
Description
IP address of the peer
Local router ID
Peer type
BGP version
Router ID of the peer
Current state of the peer
Current event of the peer
Previous state of the peer
TCP port numbers of the local router and its peer
Local holdtime interval
Local keepalive interval
Remote holdtime interval
Negotiated holdtime interval
Optional capabilities supported by the peer, including BGP
multiprotocol extensions and route refresh
Routes are advertised and received in IPv4 unicasts.
Total numbers of received packets and updates
Total numbers of sent packets and updates
Maximum allowed prefix number
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer group;
If the percentage is reached, the system generates alarm
messages.
Minimum route advertisement interval
1-18