3Com S7906E Command Reference Manual page 671

This command displays brief information about a routing table, with a routing entry contained in one line.
The information displayed includes destination IP address/mask length, protocol, priority, cost, next hop
and outbound interface. This command only displays the routes currently in use, that is, the optimal
routes.
Use the display ip routing-table verbose command to display detailed information about all routes in
the routing table.
This command displays detailed information about all active and inactive routes, including the statistics
of the entire routing table and information for each route.
Examples
# Display brief information about active routes in the routing table.
<Sysname> display ip routing-table
Routing Tables: Public
Destinations : 4
Destination/Mask
127.0.0.0/8
127.0.0.1/32
192.168.80.0/24
192.168.80.10/32
Table 1-1 display ip routing-table command output description
Field
Destinations
Routes
Destination/Mask
Proto
Pre
Cost
Nexthop
Interface
# Display detailed information about all routes in the routing table.
<Sysname> display ip routing-table verbose
Routing Table : Public
Destinations : 4
Destination: 10.1.1.0/24
Protocol: Direct
Preference: 0
NextHop: 10.1.1.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
Routes : 4
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Number of destination addresses
Number of routes
Destination address/mask length
Protocol that presents the route
Priority of the route
Cost of the route
Address of the next hop on the route
Outbound interface for packets to be forwarded along the route
Routes : 4
Process ID: 0
Cost: 0
Interface: Vlan-interface1
Neighbour: 0.0.0.0
Label: NULL
NextHop
127.0.0.1
127.0.0.1
192.168.80.10
127.0.0.1
Description
1-2
Interface
InLoop0
InLoop0
Vlan1
InLoop0