Display Bgp Ipv6 Routing-Table As-Path-Acl; Display Bgp Ipv6 Routing-Table Community - 3Com S7906E Command Reference Manual

Field

display bgp ipv6 routing-table as-path-acl

Syntax
display bgp ipv6 routing-table as-path-acl as-path-acl-number
View
Any view
Default Level
1: Monitor level
Parameters
as-path-acl-number: Number of an AS path ACL permitted by which to display routing information,
ranging from 1 to 256.
Description
Use the display bgp ipv6 routing-table as-path-acl command to display routes filtered through the
specified AS path ACL.
Examples
# Display routes filtered through the AS path ACL 20.
<Sysname> display bgp ipv6 routing-table as-path-acl 20
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
*> Network : 30:30::
NextHop : 30:30::30:1
PrefVal : 0
MED : 0
Path/Ogn: i
Refer to Table 1-5

display bgp ipv6 routing-table community

Syntax
display bgp ipv6 routing-table community [ aa:nn&<1-13> ] [ no-advertise | no-export |
no-export-subconfed ] * [ whole-match ]
Short for INCOMPLETE. It indicates that the origin of a route is
unknown and the route is learned by other means. BGP sets
?
Origin attribute of routes learned from other IGP protocols to
INCOMPLETE.
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
for description on the fields above.
Description
PrefixLen : 64
LocPrf
Label
1-14
:
: NULL