3Com S7906E Command Reference Manual page 1102

IP Multicast Volume Organization
Manual Version
20090615-C-1.01
Product Version
Release 6300 series
Organization
The IP Multicast Volume is organized as follows:
Features
Multicast Routing and
Forwarding
IGMP
PIM
MSDP
MBGP
Multicast VPN
IGMP Snooping
Multicast VLAN
IPv6 Multicast Routing
and Forwarding
MLD
Multicast routing and forwarding refer to some policies that filter RPF
routing information for IP multicast support. This document introduces
the commands for Multicast Routing and Forwarding configuration.
Internet Group Management Protocol (IGMP) is a protocol in the TCP/IP
suite responsible for management of IP multicast members. This
document introduces the commands for IGMP configuration.
PIM leverages the unicast routing table created by any unicast routing
protocol to provide routing information for IP multicast. This document
introduces the commands for PIM configuration.
Multicast source discovery protocol (MSDP) describes interconnection
mechanism of multiple PIM-SM domains. It is used is to discover
multicast source information in other PIM-SM domains. This document
introduces the commands for MSDP configuration.
As a multicast extension of MP-BGP, MBGP enables BGP to provide
routing information for multicast applications. This document introduces
the commands for MBGP configuration.
Multicast VPN is a technique that implements multicast delivery in MPLS
L3VPN networks. This document introduces the commands for Multicast
VPN configuration.
Running at the data link layer, IGMP Snooping is a multicast control
mechanism on the Layer 2 Ethernet switch and it is used for multicast
group management and control. This document introduces the
commands for IGMP Snooping configuration.
This document introduces the commands for Multicast VLAN
configuration.
IPv6 multicast routing and forwarding refer to some policies that filter
RPF routing information for IPv6 multicast support. This document
introduces the commands for IPv6 Multicast Routing and Forwarding
configuration.
MLD is used by an IPv6 router or a Ethernet Switch to discover the
presence of multicast listeners on directly-attached subnets. This
document introduces the commands for MLD configuration.
Description