Display Ospf Lsdb - 3Com S7906E Command Reference Manual

Field
State
Cost
Pri
DR
BDR

display ospf lsdb

Syntax
display ospf [ process-id ] lsdb [ brief | [ { ase | router | network | summary | asbr | nssa |
opaque-link | opaque-area | opaque-as } [ link-state-id ] ] [ originate-router advertising-router-id |
self-originate ] ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
brief: Displays brief LSDB information.
ase: Displays Type-5 LSA (AS External LSA) information in the LSDB.
router: Displays Type-1 LSA (Router LSA) information in the LSDB.
network: Displays Type-2 LSA (Network LSA) information in the LSDB.
summary: Displays Type-3 LSA (Network Summary LSA) information in the LSDB.
asbr: Displays Type-4 LSA (ASBR Summary LSA) information in the LSDB.
nssa: Displays Type-7 LSA (NSSA External LSA) information in the LSDB.
opaque-link: Displays Type-9 LSA (Opaque-link LSA) information in the LSDB.
opaque-area: Displays Type-10 LSA (Opaque-area LSA) information in the LSDB.
opaque-as: Displays Type-11 LSA (Opaque-AS LSA) information in the LSDB.
Interface state defined by interface state machine:
DOWN: In this state, no protocol traffic will be sent or received on the
interface.
Waiting: Means the interface starts sending and receiving Hello packets
and the router is trying to determine the identity of the (Backup) designated
router for the network.
p-2-p: Means the interface will send Hello packets at the interval of
HelloInterval, and try to establish an adjacency with the neighbor.
DR: Means the router itself is the designated router on the attached
network.
BDR: Means the router itself is the backup designated router on the
attached network.
DROther: Means the interface is on a network on which another router has
been selected as the designated router.
Interface cost
Router priority
The DR on the interface's network segment
The BDR on the interface's network segment
1-18
Description