Display Tcp Status - 3Com S7906E Command Reference Manual

Closed connections
Packets dropped with MD5 authentication
Packets permitted with MD5 authentication

display tcp status

Syntax
display tcp status
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display tcp status command to display status of all TCP connections for monitoring TCP
connections.
Examples
# Display status of all TCP connections.
<Sysname> display tcp status
*: TCP MD5 Connection
TCPCB Local Add:port
ca3f8244 0.0.0.0:23
ca3f8f04 0.0.0.0:80
ca3f79c4 0.0.0.0:7547
ca562cc4 192.168.0.74:23
Table 1-7 display tcp status command output description
Field
*
TCPCB
Local Add:port
Foreign Add:port
Field
Foreign Add:port
0.0.0.0:0
0.0.0.0:0
0.0.0.0:0
192.168.0.2:1650
If the status information of a TCP connection contains *, the TCP adopts
the MD5 algorithm for authentication.
TCP control block
Local IP address and port number
Remote IP address and port number
Description
Number of connections closed; in brackets are
connections closed accidentally (before receiving SYN
from the peer) and connections closed initiatively (after
receiving SYN from the peer)
Number of packets dropped with MD5 authentication
Number of packets permitted with MD5 authentication
State
Listening
Listening
Listening
Established
Description
1-13