3Com S7906E Command Reference Manual page 491

View
Any view
Default Level
1: Monitor level
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
slot slot-id: Displays the ARP entries of the specified slot.
vlan vlan-id: Displays the ARP entries of the specified VLAN. The VLAN ID ranges from 1 to 4,094.
interface interface-type interface-number: Displays the ARP entries of the interface specified by the
argument interface-type interface-number.
verbose: Displays detailed information about ARP entries.
|: Uses a regular expression to specify the ARP entries to be displayed. For detailed information about
regular expressions, refer to Basic System Configuration in the System Volume.
begin: Displays ARP entries from the first one containing the specified string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries containing the specified string.
regular-expression: A case-sensitive string for matching, consisting of 1 to 256 characters.
count: Displays the number of ARP entries.
Description
Use the display arp command to display ARP entries in the ARP mapping table.
If no parameter is specified or the all keyword is specified, all ARP entries are displayed.
Related commands: arp static, reset arp.
Examples
# Display the detailed information of all ARP entries.
<Sysname> display arp all verbose
IP Address
Vpn-instance Name
20.1.1.1
test
193.1.1.70
[No Vrf]
192.168.0.115
[No Vrf]
192.168.0.39
[No Vrf]
Type: S-Static D-Dynamic
MAC Address VLAN ID
000f-e200-0001 N/A
00e0-fe50-6503 100
000d-88f7-9f7d 1
0012-a990-2241 1
Interface
N/A
GE2/0/1
GE2/0/2
GE2/0/3
1-4
Aging Type
N/A S
DIS D
DIS D
DIS D