Display Ospf Cumulative - 3Com S7906E Command Reference Manual

Interface
Cost
State
Type
MTU
Priority
Designated Router
Backup Designated Router
Timers

display ospf cumulative

Syntax
display ospf [ process-id ] cumulative
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the display ospf cumulative command to display OSPF statistics.
Use of this command is helpful for troubleshooting.
Examples
# Display OSPF statistics.
<Sysname> display ospf cumulative
OSPF Process 1 with Router ID 2.2.2.2
IO Statistics
Type
Hello
DB Description
Link-State Req
Link-State Update
Link-State Ack
Field
Interface in the area
Interface cost
Interface state
Interface network type
Interface MTU
Router priority
The Designated Router
The Backup Designated Router
Intervals of timers: hello, dead, poll, retransmit, and transmit
delay
Cumulations
Input
61
2
1
3
3
Description
Output
122
3
1
3
2
1-13