Display Igmp Group Port-Info - 3Com S7906E Command Reference Manual

Version1-host-present-timer-expiry

display igmp group port-info

Syntax
display igmp group port-info [ vlan vlan-id ] [ slot slot-number ] [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
vlan-id: VLAN ID, in the range of 1 to 4094. If you do not specify a VLAN, this command will display the
Layer 2 port information of IGMP multicast groups in all VLANs.
slot slot-number: Displays the Layer 2 port information about IGMP multicast groups on the specified
card. If you do not specify a slot number, this command will display the Layer 2 port information about
IGMP multicast groups on the SRPU.
verbose: Displays the detailed information about Layer 2 ports of IGMP multicast groups.
Description
Use the display igmp group port-info command to view Layer 2 port information of IGMP multicast
groups.
Examples
# View detailed Layer 2 ports information of IGMP multicast groups.
<Sysname> display igmp group port-info verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port unit board: Mask(0x8 3)
Router port(s):total 1 port.
GE2/0/1
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
Field
(D)
1-3
Description
Remaining time of the IGMPv1 host present
timer, where "off" means that the timer never
expires