Ipv6 Static Routing Configuration Commands - 3Com S7906E Command Reference Manual

1

IPv6 Static Routing Configuration Commands

Throughout this chapter, the term "router" refers to a router in a generic sense or a Layer 3 switch
running routing protocols.
EA boards (such as LSQ1GP12EA and LSQ1TGX1EA) do not support IPv6 features.
IPv6 Static Routing Configuration Commands
delete ipv6 static-routes all
Syntax
delete ipv6 static-routes all
View
System view
Default Level
2: System level
Parameters
None
Description
Use the delete ipv6 static-routes all command to delete all static routes including the default route.
When using this command, you will be prompted whether to continue the deletion and only after you
confirm the deletion will the static routes be deleted.
Related commands: display ipv6 routing-table, ipv6 route-static.
Examples
# Delete all IPv6 static routes.
<Sysname> system-view
[Sysname] delete ipv6 static-routes all
This will erase all ipv6 static routes and their configurations, you must reconfigure all
static routes
Are you sure?[Y/N]Y
1-1