Local-Proxy-Arp Enable; Proxy-Arp Enable - 3Com S7906E Command Reference Manual

Description
Use the display proxy-arp command to display the proxy ARP status.
Related commands: proxy-arp enable.
Examples
# Display the status of the proxy ARP status on VLAN-interface 1.
<Sysname> display proxy-arp interface vlan-interface 1
Interface Vlan-interface1
Proxy ARP status: disabled

local-proxy-arp enable

Syntax
local-proxy-arp enable
undo local-proxy-arp enable
View
VLAN interface view
Default Level
2: System level
Parameters
None
Description
Use the local-proxy-arp enable command to enable local proxy ARP.
Use the undo local-proxy-arp enable command to disable local proxy ARP.
By default, local proxy ARP is disabled.
Related commands: display local-proxy-arp.
Examples
# Enable local proxy ARP on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] local-proxy-arp enable

proxy-arp enable

Syntax
proxy-arp enable
undo proxy-arp enable
View
VLAN interface view, Ethernet interface view
2-2