Igmp Startup-Query-Count; Igmp Startup-Query-Interval - 3Com S7906E Command Reference Manual

igmp startup-query-count

Syntax
igmp startup-query-count value
undo igmp startup-query-count
View
Interface view
Default Level
2: System level
Parameters
value: Startup query count, namely, the number of queries the IGMP querier sends on startup, with an
effective range of 2 to 5.
Description
Use the igmp startup-query-count command to configure the startup query count on the current
interface.
Use the undo igmp startup-query-count command to restore the system default.
By default, the startup query count is set to the IGMP querier robustness variable.
By default, the IGMP querier robustness variable is 2, so the startup query count is also 2.
Related commands: startup-query-count, igmp robust-count.
Examples
# Set the startup query count to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp startup-query-count 3

igmp startup-query-interval

Syntax
igmp startup-query-interval interval
undo igmp startup-query-interval
View
Interface view
1-17