Tunnel L2 State
Tunnel Type
Tunnel Metric
Destination Router ID
# Display IS-IS interface statistics information.
<sysname> display isis interface statistics
Type
LAN
P2P
Table 1-4 display isis interface statistics command output description
Field
Type
IPv4 UP
IPv4 DOWN
IPv6 UP
IPv6 DOWN
display isis license
Syntax
display isis license
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display isis license command to display the information of the IS-IS license.
Examples
# Display the information of the IS-IS license.
Field
Interface Statistics information for ISIS(1)
--------------------------------------------
IPv4 Up/Down
0/1
4/0
Network type of the interface:
LAN for broadcast network.
P2P for point-to-point network.
Number of IS-IS interfaces in up state
Number of IS-IS interfaces in down state
Number of IS-ISv6 interfaces in up state. A value of "-" means IPv6 is not enabled.
Number of IS-ISv6 interfaces in down state. A value of "-" means IPv6 is not enabled.
IS-IS TE tunnel level-2 state
Tunnel type
IGP metric of the TE tunnel
Destination address of TE tunnel inteface
IPv6 Up/Down
-/-
-/-
Description
1-12
Description
Need help?
Do you have a question about the S7906E and is the answer not in the manual?
Questions and answers