Igmp Version; Last-Member-Query-Interval (Igmp View) - 3Com S7906E Command Reference Manual

igmp version

Syntax
igmp version version-number
undo igmp version
View
Interface view
Default Level
2: System level
Parameters
version-number: IGMP version, in the range of 1 to 3.
Description
Use the igmp version command to configure the IGMP version on the current interface.
Use the undo igmp version command to restore the default IGMP version.
The default IGMP version is version 2.
Related commands: version.
Examples
# Set the IGMP version to IGMPv1 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp version 1

last-member-query-interval (IGMP view)

Syntax
last-member-query-interval interval
undo last-member-query-interval
View
Public instance IGMP view, VPN instance IGMP view
Default Level
2: System level
Parameters
interval: Last-member query interval in seconds, with an effective range of 1 to 5.
Description
Use the last-member-query-interval command to configure the global IGMP last-member query
interval.
Use the undo last-member-query-interval command to restore the system default.
1-21