3Com S7906E Command Reference Manual page 1179

Description
Use the display pim neighbor command to view the PIM neighbor information.
Note that if neither all-instance nor vpn-instance is specified, this command will display the
information on the public instance.
Examples
# View the information of all PIM neighbors in the public instance.
<Sysname> display pim neighbor
VPN-Instance: public net
Total Number of Neighbors = 2
Neighbor
10.1.1.2
20.1.1.2
# In the public instance, view the detailed information of the PIM neighbor whose IP address is
11.110.0.20.
<Sysname> display pim neighbor 11.110.0.20 verbose
VPN-Instance: public net
Neighbor: 11.110.0.20
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Table 1-8 display pim neighbor command output description
VPN-Instance: public net
Total Number of Neighbors
Neighbor
Interface
Uptime
Expires/Expiry time
Dr-Priority/DR Priority
Generation ID
Holdtime
Interface
Vlan1
Vlan2
Field
Uptime Expires Dr-Priority
02:50:49 00:01:31 1
02:49:39 00:01:42 1
Description
Public instance
Total number of PIM neighbors
IP address of the PIM neighbor
Interface connecting the PIM neighbor
Length of time for which the PIM neighbor has been up, in
hh:mm:ss
Remaining time of the PIM neighbor, in hh:mm:ss; "never"
means that the PIM neighbor is always up and reachable.
Priority of the PIM neighbor
Generation ID of the PIM neighbor (a random value
indicating a status change of the PIM neighbor)
Holdtime of the PIM neighbor; "forever" means that the
PIM neighbor is always up and reachable
1-22