Display Ospf Routing - 3Com S7906E Command Reference Manual

display ospf routing

Syntax
display ospf [ process-id ] routing [ interface interface-type interface-number ] [ nexthop
nexthop-address ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
interface interface-type interface-number: Displays OSPF routing information advertised via the
interface.
nexthop nexthop-address: Displays OSPF routing information with the specified next hop.
Description
Use the display ospf routing command to display OSPF routing information.
If no OSPF process is specified, the routing information of all OSPF processes is displayed.
Examples
# Display OSPF routing information.
<Sysname> display ospf routing
OSPF Process 1 with Router ID 192.168.1.2
Routing for Network
Destination
192.168.1.0/24
172.16.0.0/16
Total Nets: 2
Intra Area: 1
Table 1-15 display ospf routing command output description
Field
Destination
Cost
Type
NextHop
AdvRouter
Area
Routing Tables
Cost Type
1562 Stub
1563 Inter
Inter Area: 1 ASE: 0
Destination network
Cost to destination
Route type: intra-area, transit, stub, inter-area, type1 external, type2 external.
Next hop address
Advertising router
Area ID
NextHop AdvRouter
192.168.1.2 192.168.1.2
192.168.1.1 192.168.1.1
NSSA: 0
Description
1-28
Area
0.0.0.0
0.0.0.0