Multicast Ipv6 Load-Splitting - 3Com S7906E Command Reference Manual

View
System view
Default Level
2: System level
Parameters
limit: Maximum number of entries in the IPv6 multicast forwarding table. The value ranges from 0 to
512.
Description
Use the multicast ipv6 forwarding-table route-limit command to configure the maximum number of
entries in the IPv6 multicast forwarding table.
Use the undo multicast ipv6 forwarding-table route-limit command to restore the system default.
By default, the maximum number of entries in the IPv6 multicast forwarding table is the maximum
number allowed by the system, namely 512.
Related commands: display multicast ipv6 forwarding-table.
Examples
# Set the maximum number of entries in the IPv6 multicast forwarding table to 200.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table route-limit 200

multicast ipv6 load-splitting

Syntax
multicast ipv6 load-splitting {source | source-group }
undo multicast ipv6 load-splitting
View
System view
Default Level
2: System level
Parameters
source: Specifies to implement IPv6 multicast load splitting on a per-source basis.
source-group: Specifies to implement IPv6 multicast load splitting on a per-source and per-group
basis.
Description
Use the multicast load-splitting command to enable load splitting of IPv6 multicast traffic.
Use the undo multicast load-splitting command to disable load splitting of IPv6 multicast traffic.
By default, load splitting of IPv6 multicast traffic is disabled.
1-9