3Com S7906E Command Reference Manual page 1319

Hide thumbs Also See for S7906E:

Table of Contents

By default, multicast source port filtering is not enabled.

This command works on both IGMP Snooping–enabled VLANs and VLANs with IGMP enabled on their

VLAN interfaces.

# Enable source port filtering for multicast data on interfaces Ethernet 2/0/1 through Ethernet 2/0/4.

<Sysname> system-view

[Sysname] igmp-snooping

[Sysname-igmp-snooping] source-deny port ethernet 2/0/1 to ethernet 2/0/4

Chapters

Table of Contents

Do you have a question about the S7906E and is the answer not in the manual?

S7910e S7906e-v S7903e S7903e-s S7902e