Pim Hello-Option Neighbor-Tracking - 3Com S7906E Command Reference Manual

Description
Use the pim hello-option lan-delay command to configure the LAN-delay time, namely the length of
time the device waits between receiving a prune message and taking a prune action, on the current
interface.
Use the undo pim hello-option lan-delay command to restore the system default.
By default, the LAN-delay time to 500 milliseconds.
Related commands:
hello-option lan-delay.
Examples
# Set the LAN-delay time to 200 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option lan-delay 200

pim hello-option neighbor-tracking

Syntax
pim hello-option neighbor-tracking
undo pim hello-option neighbor-tracking
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the pim hello-option neighbor-tracking command to disable join suppression, namely enable
neighbor tracking, on the current interface.
Use the undo pim hello-option neighbor-tracking command to enable join suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
Related commands: hello-option neighbor-tracking.
Examples
# Disable join suppression on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option neighbor-tracking
pim hello-option override-interval,
1-37
hello-option override-interval,