Display Pim Ipv6 Routing-Table - 3Com S7906E Command Reference Manual

Table 1-7 display pim ipv6 neighbor command output description
Field
Total Number of Neighbors
Neighbor
Interface
Uptime
Expires/Expiry time
Dr-Priority/DR Priority
Generation ID
Holdtime
LAN delay
Override interval
State refresh interval
Neighbor tracking

display pim ipv6 routing-table

Syntax
display pim ipv6 routing-table [ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | incoming-interface [ interface-type interface-number | register ] | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register } | mode mode-type | flags
flag-value | fsm ] *
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16, where x
and y represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Prefix length of the IPv6 multicast group/source address prefix. For an IPv6 multicast
group address, the effective range is 8 to 128 and the default value is 128; for an IPv6 multicast source
address, the effective range is 0 to 128 and the default value is 128.
incoming-interface: Displays routing entries that contain the specified interface as the incoming
interface.
interface-type interface-number: Specifies an interface by its type and number.
Total number of IPv6 PIM neighbors
IPv6 address of the PIM neighbor
Interface connecting the IPv6 PIM neighbor
Length of time since the IPv6 PIM neighbor was discovered
Remaining time of the IPv6 PIM neighbor; "never" means that
the IPv6 PIM neighbor is always up and reachable.
Priority of the IPv6 PIM neighbor
Generation ID of the IPv6 PIM neighbor (a random value
indicating status change of the IPv6 PIM neighbor)
Holdtime of the IPv6 PIM neighbor; "forever" means that the
IPv6 PIM neighbor is always up and reachable
Prune delay
Prune override interval
Interval of sending state refresh messages
Neighbor tracking status (enabled/disabled)
1-18
Description