Peer Reflect-Client (Ipv6 Address Family View); Peer Route-Limit (Ipv6 Address Family View) - 3Com S7906E Command Reference Manual

[Sysname-bgp-af-ipv6] peer 1:2::3:4 public-as-only

peer reflect-client (IPv6 address family view)

Syntax
peer { group-name | ipv4-address | ipv6-address } reflect-client
undo peer { group-name | ipv4-address | ipv6-address } reflect-client
View
IPv6 address family view
Default Level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
Description
Use the peer reflect-client command to configure the router as a route reflector and specify a
peer/peer group as a client.
Use the undo peer reflect-client command to remove the configuration.
By default, neither route reflector nor client is configured.
Related commands: reflect between-clients, reflector cluster-id.
Examples
# Configure the local device as a route reflector and specify the peer group test as a client.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test
[Sysname-bgp-af-ipv6] peer test reflect-client

peer route-limit (IPv6 address family view)

Syntax
peer { group-name | ipv4-address | ipv6-address } route-limit prefix-number [ { alert-only | reconnect
reconnect-time } | percentage ] *
undo peer { group-name | ipv4-address | ipv6-address } route-limit
View
IPv6 address family view
Default Level
2: System level
1-41