Display Bgp Routing-Table As-Path-Acl - 3Com S7906E Command Reference Manual

Table 1-6 display bgp routing command output description
Field
Total Number of
Routes
BGP Local
router ID
Status codes
Origin
Network
Next Hop
MED
LocPrf
PrefVal
Path
PrefVal
Ogn

display bgp routing-table as-path-acl

Syntax
display bgp routing-table as-path-acl as-path-acl-number
View
Any view
Total Number of Routes
BGP local router ID
Status codes:
* – valid
> – best
d – damped
h – history
i – internal (IGP)
s – summary suppressed (suppressed)
S – Stale
i – IGP (originated in the AS)
e – EGP (learned through EGP)
? – incomplete (learned by some other means)
Destination network address
Next hop IP address
MULTI_EXIT_DISC attribute
Local preference value
Preferred value of the route
AS_PATH attribute, recording the ASs the packet has passed to avoid routing
loops
Preferred value
Origin attribute of the route, which can be one of the following values:
Indicates that the route is interior to the AS.
i
Summary routes and the routes injected with the network command
are considered IGP routes.
Indicates that the route is learned from the Exterior Gateway Protocol
e
(EGP).
Short for INCOMPLETE. It indicates that the origin of the route is
?
unknown and the route is learned by other means.
Description
1-20