Pim Hello-Option Holdtime; Pim Hello-Option Lan-Delay - 3Com S7906E Command Reference Manual

pim hello-option holdtime

Syntax
pim hello-option holdtime interval
undo pim hello-option holdtime
View
Interface view
Default Level
2: System level
Parameters
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535. 65,535 means
that the PIM neighbor is always reachable.
Description
Use the pim hello-option holdtime command to configure the PIM neighbor timeout time on the
current interface.
Use the undo pim hello-option holdtime command to restore the system default.
By default, the PIM neighbor timeout time is 105 seconds.
Related commands: hello-option holdtime.
Examples
# Set the PIM neighbor timeout time to 120 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option holdtime 120

pim hello-option lan-delay

Syntax
pim hello-option lan-delay interval
undo pim hello-option lan-delay
View
Interface view
Default Level
2: System level
Parameters
interval: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.
1-36