Bgp Configuration Commands; Aggregate - 3Com S7906E Command Reference Manual

1

BGP Configuration Commands

The term "router" in this document refers to a router in a generic sense or a Layer 3 switch.
BGP Configuration Commands
For more information about routing policy configuration commands in this document, refer to Routing
Policy Commands in the IP Routing Volume.

aggregate

Syntax
aggregate ip-address { mask | mask-length } [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy route-policy-name ] *
undo aggregate ip-address { mask | mask-length }
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
ip-address: Summary address.
mask: Summary route mask, in dotted decimal notation.
mask-length: Length of summary route mask, in the range 0 to 32.
as-set: Creates a summary with AS set.
attribute-policy route-policy-name: Sets the attributes of the summary route according to the routing
policy The routing policy name is a string of 1 to 19 characters.
detail-suppressed: Only advertises the summary route.
1-1