3Com S7906E Command Reference Manual page 1246

Field
Interface
# Display the detailed information of the multicast routing table.
<Sysname> display ip multicast routing-table verbose
Routing Table : Public
Destinations : 2
Destination: 192.168.80.0/24
Protocol: Direct
Preference: 0
NextHop: 192.168.80.10
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active Adv
Tag: 0
Destination: 192.168.80.10/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
Table 1-3 display ip multicast routing-table verbose command output description
Field
Destination Destination/mask
Protocol Routing protocol that discovered the route
Process ID Process ID
Preference Route preference
Cost Route cost
NextHop Nexthop of the route
Interface Outgoing interface to reach the destination
RelyNextHop Recursive next hop
Neighbour Neighbor address
Tunnel ID Tunnel ID
Label Label
Route state: Active, Inactive, Adv (can be advertised), NoAdv (cannot be
State
advertised)
Age Age of the route, in the sequence of hour, minute, and second from left to right.
Outgoing interface to reach the destination
Routes : 2
Process ID: 0
Cost: 0
Interface: Vlan-interface1
Neighbour: 0.0.0.0
Label: NULL
Age: 00h14m49s
Process ID: 0
Cost: 0
Interface: InLoopBack0
Neighbour: 0.0.0.0
Label: NULL
Age: 00h14m49s
Description
1-10
Description