Pim Ipv6 Timer Hello - 3Com S7906E Command Reference Manual

View
Interface view
Default Level
2: System level
Parameters
interval: Graft retry period in seconds, with an effective range of 1 to 65,535.
Description
Use the pim ipv6 timer graft-retry command to configure the graft retry period.
Use the undo pim ipv6 timer graft-retry command to restore the system default.
By default, the graft retry period is 3 seconds.
Examples
# Set the graft retry period to 80 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 timer graft-retry 80

pim ipv6 timer hello

Syntax
pim ipv6 timer hello interval
undo pim ipv6 timer hello
View
Interface view
Default Level
2: System level
Parameters
interval: Hello interval in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the pim ipv6 timer hello command to configure on the current interface the interval at which hello
messages are sent.
Use the undo pim ipv6 timer hello command to restore the system default.
By default, hello messages are sent at the interval of 30 seconds.
Related commands: timer hello.
Examples
# Set the hello interval to 40 seconds on VLAN-interface 100.
<Sysname> system-view
1-37