3Com S7906E Command Reference Manual page 704

Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Hostroutes : Enabled
Maximum number of balanced paths : 8
Update time
Suppress time :
update output delay :
TRIP retransmit time :
TRIP response packets retransmit count :
Silent interfaces : None
Default routes : Only
Verify-source : Enabled
Networks :
192.168.1.0
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Table 1-1 display rip command output description
Field
Public VPN-instance name (or Private
VPN-instance name)
RIP process
RIP version
Preference
Checkzero
Default-cost
Summary
Hostroutes
Maximum number of balanced paths
Update time
Timeout time
Suppress time
update output delay
output count
Garbage-collect time
TRIP retransmit time
TRIP response packets retransmit count
: 30 sec(s) Timeout time
120 sec(s) Garbage-collect time :
20(ms) output count :
5 sec(s)
Default route cost : 3
The RIP process runs under a public VPN instance/The
RIP process runs under a private VPN instance
RIP process ID
RIP version 1 or 2
RIP route priority
Indicates whether the zero field check is enabled for
RIPv1 messages.
Default cost of the redistributed routes
Indicates whether route summarization is enabled
Indicates whether to receive host routes
Maximum number of load balanced routes
RIP update interval
RIP timeout time
RIP suppress interval
RIP packet sending interval
Maximum number of RIP packets sent at each interval
RIP garbage collection interval
TRIP retransmit interval for sending update requests and
responses.
Maximum retransmit times for update requests and
responses
1-4
: 180 sec(s)
120 sec(s)
3
36
Description