3Com S7906E Command Reference Manual page 485

specified type is displayed; with both the interface type and interface number specified, only the
information about the specified interface is displayed.
Related commands: display ip interface.
Examples
# Display brief information about VLAN interfaces.
<Sysname> display ip interface brief vlan-interface
*down: administratively down
(s): spoofing
Interface
Vlan-interface1
Vlan-interface2
Table 1-2 display ip interface brief command output description
Field
*down: administratively down
(s) : spoofing
Interface
Physical
Protocol
IP Address
Description
ip address
Syntax
ip address ip-address { mask | mask-length } [ sub ]
undo ip address [ ip-address { mask | mask-length } [ sub ] ]
Physical Protocol IP Address
up up 6.6.6.6
up up 7.7.7.7
The interface is administratively shut down with the shutdown
command.
Spoofing attribute of the interface. It indicates that an interface
whose network layer protocol is displayed up may have no link
present or the link is set up only on demand.
Interface name
Physical state of the interface, which can be
*down: Indicates that the interface is administratively down; that
is, the interface is shut down with the shutdown command.
down: Indicates that the interface is administratively up but its
physical state is down, which may be caused by a connection or
link failure.
up: Indicates that both the administrative and physical states of the
interface are up.
Link layer protocol state of the interface, which can be
down: Indicates that the protocol state of the interface is down,
which is usually because that no IP address is assigned to the
interface.
up: Indicates that the protocol state of the interface is up.
IP address of interface (If no IP address is configured, "unassigned"
is displayed.)
Interface description information, for which at most 12 characters
can be displayed. If there are more that 12 characters, only the first
nine characters are displayed.
1-4
Description
Vlan-inte...
VLAN2
Description