Pim Hello-Option Override-Interval; Pim Holdtime Assert - 3Com S7906E Command Reference Manual

pim hello-option override-interval

Syntax
pim hello-option override-interval interval
undo pim hello-option override-interval
View
Interface view
Default Level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use the pim hello-option override-interval command to configure the prune override interval on the
current interface.
Use the undo pim hello-option override-interval command to restore the system default.
By default, the prune override interval is 2,500 milliseconds.
Related commands:
override-interval.
Examples
# Set the prune override interval to 2,000 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option override-interval 2000

pim holdtime assert

Syntax
pim holdtime assert interval
undo pim holdtime assert
View
Interface view
Default Level
2: System level
Parameters
interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use the pim holdtime assert command to configure the assert timeout time on the current interface.
pim hello-option lan-delay,
1-38
hello-option lan-delay, hello-option