3Com S7906E Command Reference Manual page 1111

Parameters
all-instance: Specifies all instances.
vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.
config: Displays the configuration information of static routes.
source-address: Multicast source address.
mask: Mask of the multicast source address.
mask-length: Mask length of the multicast source address, in the range of 0 to 32.
Description
Use the display multicast routing-table static command to view the information of multicast static
routes.
Note that if neither all-instance nor vpn-instance is specified, this command displays the information
on the public instance.
Examples
# View all the multicast static routes in the public instance.
<Sysname> display multicast routing-table static
Multicast Routing Table of VPN-Instance: public net
Routes : 1
Mroute 10.10.0.0/16
Interface = Vlan-interface1
Matched routing protocol = <none>, Route-policy = <none>
Preference = 1, Order = 1
Running Configuration = ip rpf-route-static 10.10.0.0 16 2.2.2.2 order 1
# View the configuration information of multicast static routes in the public instance.
<Sysname> display multicast routing-table static config
Multicast Routing Table of VPN-Instance: public net
Routes : 1
Mroute 10.10.0.0/16,
Matched routing protocol = <none>, Route-policy = <none>
Preference = 1, Order = 1
Table 1-5 display multicast routing-table static command output description
Multicast Routing Table of VPN-Instance: public
net
Mroute
Interface
RPF neighbor = 2.2.2.2
Field
RPF Neighbor = 2.2.2.2
Multicast routing table for the public network
Multicast route source address and its mask
length
Outgoing interface to the multicast source
1-7
Description