Bootfile-Name; Dhcp Enable - 3Com S7906E Command Reference Manual

Examples
# Specify the IP address 1.1.1.1, port number 80, shared key aabbcc of the BIMS server in DHCP
address pool 0 for the client.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bims-server ip 1.1.1.1 port 80 sharekey aabbcc

bootfile-name

Syntax
bootfile-name bootfile-name
undo bootfile-name
View
DHCP address pool view
Default Level
2: System level
Parameters
bootfile-name: Boot file name, a string of 1 to 63 characters.
Description
Use the bootfile-name command to specify a bootfile name in the DHCP address pool for the client.
Use the undo bootfile-name command to remove the specified bootfile name.
By default, no bootfile name is specified.
If you execute the bootfile-name command repeatedly, the latest configuration will overwrite the
previous one.
Examples
# Specify the bootfile name aaa in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name aaa

dhcp enable

Syntax
dhcp enable
undo dhcp enable
View
System view
1-2