Holdtime Join-Prune (Pim View); Jp-Pkt-Size (Pim View) - 3Com S7906E Command Reference Manual

holdtime join-prune (PIM view)

Syntax
holdtime join-prune interval
undo holdtime join-prune
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use the holdtime join-prune command to configure the global value of the join/prune timeout time.
Use the undo holdtime join-prune command to restore the system default.
By default, the join/prune timeout time is 210 seconds.
Related commands: holdtime assert, pim holdtime assert, pim holdtime join-prune.
Examples
# Set the global value of the join/prune timeout time to 280 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime join-prune 280

jp-pkt-size (PIM view)

Syntax
jp-pkt-size packet-size
undo jp-pkt-size
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
packet-size: Maximum size of join/prune messages in bytes, with an effective range of 100 to 8,100.
Description
Use the jp-pkt-size command to configure the maximum size of join/prune messages.
Use the undo jp-pkt-size command to restore the system default.
1-31