Display Isis Route - 3Com S7906E Command Reference Manual

display isis route

Syntax
display isis route [ ipv4 ] [ [ level-1 | level-2 ] | verbose ] * [ process-id | vpn-instance
vpn-instance-name ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv4: Displays IS-IS IPv4 routing information (the default).
verbose: Displays detailed IS-IS IPv4 routing information.
process-id: Displays the IS-IS IPv4 routing information of the IS-IS process. The ID is in the range of 1
to 65535.
vpn-instance-name: Displays the IS-IS IPv4 routing information of the VPN instance. The
vpn-instance-name is a string of 1 to 31 characters.
level-1: Displays Level-1 IS-IS routes.
level-2: Displays Level-2 IS-IS routes.
Description
Use the display isis route command to display IS-IS IPv4 routing information.
If no level is specified, both Level-1 and Level-2 routing information will be displayed.
Examples
# Display IS-IS IPv4 routing information.
<Sysname> display isis route 1
IPV4 Destination
--------------------------------------------------------------------------
1.1.0.0/16
1.2.0.0/16
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv4 Level-1 Forwarding Table
-------------------------------------
IntCost ExtCost ExitInterface
20 NULL
10 NULL
ISIS(1) IPv4 Level-2 Forwarding Table
1-21
NextHop
Vlan1 1.2.1.1
Vlan1 Direct
Flags
R/L/-
D/L/-