reset ip ip-prefix
Syntax
reset ip ip-prefix [ ip-prefix-name ]
View
User view
Default Level
2: System level
Parameters
ip-prefix-name: IP prefix list name, a string of 1 to 19 characters.
Description
Use the reset ip ip-prefix command to clear the statistics of a specified IPv4 prefix list. If no
ip-prefix-name is specified, the statistics of all IPv4 prefix lists will be cleared.
Examples
# Clear the statistics of IPv4 prefix list abc.
<Sysname> reset ip ip-prefix abc
IPv6 Route Policy Configuration Commands
apply ipv6 next-hop
Syntax
apply ipv6 next-hop ipv6-address
undo apply ipv6 next-hop
View
Route policy view
Default Level
2: System level
Parameters
ipv6-address: Next hop IPv6 address.
Description
Use the apply ipv6 next-hop command to set a next hop for IPv6 routes.
Use the undo apply ipv6 next-hop command to remove the clause configuration.
No next hop address is set for IPv6 routing information by default.
This command cannot set a next hop for redistributed routes.
1-27