Display Pim Ipv6 Neighbor - 3Com S7906E Command Reference Manual

display pim ipv6 neighbor

Syntax
display pim ipv6 neighbor [ interface interface-type interface-number | ipv6-neighbor-address |
verbose ] *
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Displays the IPv6 PIM neighbor information on a particular interface.
ipv6-neighbor-address: Displays the information of a particular IPv6 PIM neighbor.
verbose: Displays the detailed IPv6 PIM neighbor information.
Description
Use the display pim ipv6 neighbor command to view the IPv6 PIM neighbor information.
Examples
# View the information of all IPv6 PIM neighbors.
<Sysname> display pim ipv6 neighbor
Total Number of Neighbors = 2
Neighbor
FE80::A01:101:1
FE80::A01:102:1
# View the detailed information of the IPv6 PIM neighbor whose IPv6 address is FE80::1.
<Sysname> display pim ipv6 neighbor fe80::1 verbose
Neighbor: FE80:: 1
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Interface
Vlan1 02:50:49 00:01:31 1
Vlan2 02:49:39 00:01:42 1
1-17
Uptime Expires Dr-Priority