checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
Table 1-13 display udp ipv6 statistics command output description
Total
checksum error
shorter than header
data length larger than packet
unicast(no socket on port)
broadcast/multicast(no socket on port)
not delivered, input socket full
input packet missing pcb cache
dns server ipv6
Syntax
dns server ipv6 ipv6-address [ interface-type interface-number ]
undo dns server ipv6 ipv6-address [ interface-type interface-number ]
View
System view
Default Level
2: System level
Parameters
ipv6-address: IPv6 address of a DNS server.
interface-type interface-number: Specifies an interface. When the IPv6 address of the DNS server is a
link-local address, this argument must be specified.
Field
1-20
Description
Total number of received/sent packets
Total number of packets with a checksum error
Total number of IPv6 UDP packets whose total
length is less than that specified by the packet
header
Total number of packets whose data length
exceeds that specified by the packet header
Total number of received unicast packets without
any socket
Total number of received broadcast/multicast
packets without any socket
Number of packets not handled because of the
receive buffer being full
Number of packets failing to match the protocol
control block (PCB) cache
Need help?
Do you have a question about the S7906E and is the answer not in the manual?
Questions and answers