Display Bgp Routing-Table Flap-Info - 3Com S7906E Command Reference Manual

Parameters
None
Description
Use the display bgp routing-table different-origin-as command to display BGP routes originating
from different autonomous systems.
Examples
# Display BGP routes originating from different ASs.
<Sysname> display bgp routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
Network
*> 55.0.0.0
*
Refer to Table 1-6

display bgp routing-table flap-info

Syntax
display bgp routing-table flap-info [ regular-expression as-regular-expression | as-path-acl
as-path-acl-number | ip-address [ { mask | mask-length } [ longer-match ] ] ]
View
Any view
Default Level
1: Monitor level
Parameters
as-regular-expression: Displays route flap information that matches the AS path regular expression,
which is a string of 1 to 80 characters.
as-path-acl-number: Displays route flap information matching the AS path ACL. The number is in the
range 1 to 256.
ip-address: Destination IP address.
mask: Mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-match: Matches the longest prefix.
Description
Use the display bgp routing-table flap-info command to display BGP route flap statistics.
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
12.1.1.1
14.1.1.2
for description on the fields above.
MED LocPrf
0
0
1-26
PrefVal Path/Ogn
0 100?
0 300?